| Feature | | |
| |
Standard Size in 1.25 x 0.8 x 0.4 inches
Five-side shielded Aluminum with Non-Conductive base, Black Anodize
Operating Temperature: -25~70 degrees
4:1 Wide Input Range
Low Cost but High Reliability
Regulated Output
Low Ripple and Noise
| |
| |
| Specification |
| | 1.All specificationsvalid at nominal input voltage,full load and +25°Cafter warm-up time
unless otherwise stated.
2.Measured with 0.1U 50V // 47U 50V Ceramic Cap. Cross to output |
| | Input Specification | |
| | Characteristics | Conditions | |
| | Voltage Range | 4:1 Range: | 9 ~ 36 VDC
18 ~ 75 VDC | |
| | | | |
| | Filter | type | |
| | | | | | |
| | Output Specification | |
| | Characteristics | Conditions | |
| | Output Power | 5 Watt （max.） | |
| | Voltage Accuracy
（Full Load and Nominal Vin） | Single: | ±2% | |
| | Dual: | ±2% | |
| | | | |
| | Minimum Load （at Full Load） | | |
| | Line Regulation
（LL to HL at Full Load） | Single: | ±0.5% | （typ.） | |
| | Dual: | ±0.5% | |
| | | | |
| | Load Regulation
（1 to at Full Load）
| Single: | 3.3S:±3%
others:±1% | （typ.） | |
| | Dual: | ±1% | |
| | | | |
| | Ripple （20MHz bandwidth） | <0.2% Vout+40mV | （max.） | |
| | | |
| | Noise （20MHz bandwidth） | <0.5% Vout+50mV | （max.） | |
| | | |
| | Temperature Coefficient | ±0.02% / °C （max.） | |
| | Short Circuit Protection | Current limit, Auto-recovery | |
| | | | | | |
| | General Specification | |
| | Characteristics | Conditions | |
| | Switching Frequency | 300K Hz （typ.） | |
| | Isolation Voltage （Input to Output） | 1600 VDC （min.） | |
| | Operating Temperature | -25 °C to +70°C （at Full Load） | |
| | Storage Temperature | -55 ℃ to +105 ℃ | |
| | Humidity | 95% RH （max.） | |
| | Cooling | Free air convection | |
| | | | | | |
| | Physical Specification | |
| | Characteristics | Conditions | |
| | Dimension （Tolerance ±0.5） | 31.8 x 20.3 x 10.2 mm | |
| | 1.25 x 0.8 x 0.4 inches | |
| | Weight | 13 g | |
| | Case Material | Five-side shielded Aluminum with Non-Conductive base, Black Anodize | |
| | | | | | |
